How the 6th edition shooting game has changed.

Most of us have read the rules and have played at least on game of 6th ed. by now. While playing my first game, it became apparent that the close range game is now the key. Yes, movement is important. Moving up to snipe good targets like heavy or special weapons sounds good. But if your close range shooting is sub par it doesn't matter. Blob squads like 20 strong necron warriors or a full platoon of guardsmen are going to see game play way more. Even full squads of tactical marines are now useful. Especially with "and they shall know no fear". Assault armies are going to try to get into close combat of course. Most are now either on foot, bike, or jump pack. This is due to the nerfing of transports. And with the changes to power weapons, 2 + armor is going to be everywhere. Volume of fire or quality of fire are key. As these armies advance, your army needs to be able to rain down either lots of shots or ap 1 &2 shots to whittle down or eliminate the advancers. Close range shooting also effects the assault phase with the addition of overwatch. Once a unit has declared a charge on one or more of your units you get to shoot. Granted it is only with "snap fire", hitting on 6s. This is where squad size comes into play. 20 necron warriors should hit 5 times if charged (20x2/6). If your opponent was only able to reach you with one model and he just died then, he cannot charge and you just saved that unit. Then during your turn you get to shoot that squad again but at normal bs. "Snap fire" isn't money in the bank but, it is better than we had in 5th. I love the rule for heavy weapons in squads that don't move can shoot normally even if the rest of the squad moved. Or most can snap fire if they move. In all, I think infantry will win you games.

My Blood Scorpions(Blood Angels) list has changed drastically. I was running razor spam. Now I am using an combination of full assault squads with jump packs and full tactical squads. My list went from 7 vehicles to 1. I am even tempted to put in some bikes. We will see....

Todays Progress on Kor'Sarro Khan riding his bike Moondrakkan

Front of Moondrakkan with Kor'Sarro Khan

I made some more progress today on Kor'Sarro Khan, Moondrakkan and Moonfang.  I popped off all of the winged skulls on the tires, both front and rear, cleaned up the oddballs and tried to reset them all evenly, as tire tread should be.










I took out a tiny drill bit and added vents where they were missing on the Multimelta barrel exhausts on both sides, and I still need to clean that up a bit.

Left side of Kor'Sarro Khan on his bike Moondrakkan

I added the little skulls from on top of the antennae on the marine bike sprues to the ends of the handlebars.  And I can see I forgot to push him all the way down in the saddle so he's holding on, my mistake.

Kor'Sarro Khan on his bike Moondrakkan

And the view from the rear, a good shot of the tire and his cloak, and if you look closely you can see the saddle back I added back on the bike with some green stuff as the original is now long gone.

Rear tire

 In this shot and the next you can see some of the work I did on Moonfang.  I tried to clean up where I had drilled poorly and the pin is exposed on the sword.  I 'sharpened' the blade, making the metal and plastic transition as smooth as I could so hopefully after paint it will be unnoticeable.  Also I filed the remnants of the hand off the hilt and did the wire wrapping.  I didn't think I could sculpt a texture into the hilt of Moonfang and on the right side handlebar of Moondrakkan, as they are both exposed so I got some wire that was really tiny and wrapped it on.  Also you can see the exhaust pipes I added more vents to...

Kor'Sarro Khan on his bike Moondrakkan with Moonfang

Wire wrapping for texture

 




 Also I put green stuff on the base and tracked the tire across, leaving the print of the front tire in the still soft putty.  I hope you can see it in the pics, it may be too hard without paint.

All in all not bad for today's progress, I hope you enjoy it, and maybe give you some ideas for your own versions.

Kor'Sarro Khan riding on Moondrakkan

  Here are some pics of my current Work-In-Progress Kor'Sarro Khan riding on Moondrakkan.

Kor'Sarro Khan with Moonfang riding Moondrakkan right side

Kor'Sarro Khan with Moonfang riding Moondrakkan left side

 I wanted to make my own version of Moondrakkan, since Games Workshop didn't seem like they were in any hurry to put one out of their own.  There were a lot of very nice characters on bikes out there to find pictures of on the internet, but none that I saw and really liked. First off, It's named Moondrakkan, for crying out loud, so my best guess is the 4th Master of the Hunt chopped the head off some great beast and said, "I'm so proud of chopping this things head off that I'm keeping this Mutha!...Artificers! Put this on my new bike!" In my imagination, it needed to be more ornate than a normal bike, and it should at least in part pay homage to the original Bikes from the early days of 40K when I started playing.  It can run in the shooting phase, which to me means it is more of a hot rod than a normal bike, so it would be wider and longer and the engine has more power than a normal bike. I tried to build all that in when I was working on it and as the idea fleshed out.  I'm sorry that some of these pics suck, but you'll get the idea. I started with the bike, a toy dragon and some Kneadatite Green Stuff.

Moondragon Mk1

It looked ok, but then I realized it had no bolters, so off came the front fender...

Moondragon Mk2

...and I added the bolters from an old school Rhino tank.  On the original OOP lead 40k bikes the bolters were mounted on the front wheel, on the current plastic bike they are up high at the handlebars, so I went in between, just under the head.  Since I had ripped the front forks off with the fender, I was attempting to replace them with sprue and tube, so I drilled holes and set bits of wire in, but then, I scrapped that idea entirely for pieces from a Necromunda bulkhead. I added the clipped off and shaved down power blade things from a Chaos biker to the front end and added some horns made of Green Stuff. And there it sat for months, untouched, unloved and abandoned.  I had run out of ideas.

Vroom-Vroom!

   A week ago I ripped it all apart, starting again with a relatively clean bike (it had the back end wrecked). I split it back apart and added plasticard down the middle to widen it slightly and added the bigger tire on the rear that the Chaplain gave me, I saw online where someone made a "Steppenwolf" Akira style bike and I really liked the look of using the top hatches off the old Rhino tank kit as armored plating for the back wheel so I did that too. I added another set of pipes from the engine to the back and changed the exhaust from the standard to MultiMelta barrels, so instead of two on each side it has three, and turned them up slightly for a sportier look.  Later I drilled out the plastic axle and inset the little axle hubs from the biker sprue on both sides.

OH! Think of the speeding tickets!






   I found a chaos backpack reactor that looked a bit like a supercharger intake so I cut that off and mated it on the front end of the engine, Green Stuffing it in.  I set magnets in Kor'Sarro's feet and in the armored plate on the bottom, and also in the front of the bike and the head/front end as well.


 I rebuilt the back end and fender with Green Stuff, plasticard and parts from a model airplane kit. I sawed a MultiMelta in half down the middle and glued that to the bottom to cover the gap between the now widened armored plate and the rear wheel.

Moondrakkan bottom view

Really Bad and Fuzzy Pic of the front end Moondrakkan

  The current Land Raider has an Aquila every so often in the tread and taking another nod to the original bike, which has studs down the middle of the tire, I tried to sculpt Aquila's for the tread pattern.  I failed.  Then I saw all the Marine Sgt. banner poles in my bits box and got an idea.  I sawed one in half down the middle giving me two pretty little winged skulls which I glued to the tire to make the new tread.
The idea for the fangs I got from a combination of the Predator movies and the scary Mammoth things from Lord of the Rings.  I debated building my own Kor'Sarro out of parts, but eventually I caved in and bought Kor'Sarro from the local Bunker.  Man, I was disappointed in the quality of the model. Both feet and the left leg and shoulder had quite a bit of bubbles on the surface and the sword is so plain it doesn't look like anything you would picture in your imagination when someone tells you that the sword is named Moonfang. His left shoulder pad had to be replaced with a look alike from the Space Marine Commander box. I chopped him all up, and repositioned him on the bike, gave him a Green Stuff fur cape and got his back banner pole together last night using the picture in the codex as my guide. As for Moonfang, I was going to use a cobbled together Mephiston sword, but the Chaplain again came to my rescue and  gave me a two handed Blood Angel Relic blade that I modified leaving the repositioned right arm. I wanted to mate up the hilt of the Blood Angel Relic blade to the blade from Mephiston's sword just after the power weapon leads.  Usually I am really good at drilling and pinning things by hand, but this time I drilled crooked for my pilot hole and the drill bit walked out on the wrong side.  You can see the pin as it is exposed on the surface in the top pic.  The Blood drop I shaved off and replaced with a Green Stuff lightning bolt.  In the end it is very similar to the one in the picture in the codex.  It's not the same, but my version of the blade has that crescent shape which to me feels more like a 'Moonfang' than the one from the Finecast model.